花纹铝板的搬运和存放注意事项

　(一)花纹铝板搬运注意事项。在搬运过程中，小心保护的同时一定要正确掌握搬运和储存的方法，注意保护好墙角，应倾斜直立。倾斜角不应超过10?，地面应覆盖木材或厚胶合板。搬运时应同时抬起两端，不得推拉，以免损坏表面氧化膜或涂层。工作表面应平整，无硬物，不得损伤铝板表面。理想的放置铝板的地方是在平地上。在搬运过程中，应进行表面和表面重叠搬运。不允许单人操作。
　　（1） Precautions for handling patterned aluminum plate. In the process of transportation, the method of transportation and storage must be grasped correctly while being protected carefully, the corner of the wall shall be protected well, and the wall shall be inclined and upright. The inclination angle shall not exceed 10 ?, and the ground shall be covered with wood or thick plywood. Both ends shall be lifted at the same time during handling, and shall not be pushed or pulled to avoid damaging the surface oxide film or coating. The wong surface shall be flat and free of hard objects and shall not damage the surface of aluminum plate. The ideal place to place aluminum plates is on flat ground. During handling, surface and surface overlapping handling shall be carried out. Single person operation is not allowed.

　　(二)花纹铝板存放注意事项。应注意铝片(铝片)和其他铝材料的运输和储存。二是铝材料的储存环境应干燥、明亮、通风良好、无腐蚀气候。同时，应防止雨、水和雪侵入仓库。铝在储存时，严禁与化学物质和潮湿物质一起储存。
　　（2） Precautions for storage of patterned aluminum plate. Attention shall be paid to the transportation and storage of aluminum sheet (aluminum sheet) and other aluminum materials. Second, the storage environment of aluminum materials shall be dry, bright, well ventilated and free of corrosion. At the same time, rain, water and snow shall be prevented from entering the warehouse. When storing aluminum, it is strictly prohibited to store it together with chemical substances and humid substances.