苏州迈浦特机械有限公司

已认证 天眼查

主营:模温机,油温机,水温机,油循环温度控制机,水循环温度控制机,冷冻机,导热油加热器,冷热一体机

铝道网  >  铝设备 >  铝铸造设备  > 铸锭加热炉  > 工业煤改电硫化机专项使用导热油控温设备

工业煤改电硫化机专项使用导热油控温设备

价格

面议

  • 单价:电议
  • 最小起订量: 1
  • 所在地:江苏 苏州
  • 供货总量: 111111
  • 发布时间:2017-06-02

联系方式

产品描述

   导热油控温设备结构性能介绍   MPWH-30-70

 

173-726O-59O6  Mold temperature rise, small temperature difference, energy-saving more than 20%. Use flange type Swedish wire double power stainless steel electric heating pipe It is used in different temperature cool occasions, Imported hot wire, long service life, not easy to burn out; http://www.dianjiareyoulu.com pressure indicator Table: solenoid valve imported from Taiwan tripod brand UNID, high temperature 180 degrees. Back water thermometer can monitor mould Whether the hole is blocked or not and the injection forming condition is stable. High voltage safety protection system, explosion protection device, high voltage safety Valve. Pressure system pump adopts Italy "fryde" small flow, high pressure. Cooler: the South Korean Poret Beijing plate heat exchanger with high cooling speed and accurate temperature cool. Adopt "Fuji", no fuse switch, short circuit and pass Rapid protection. The electromagnetic contactor adopts the French "Schneider" or the German "Admiralty Muller", and the service life is long; It adopts the "WEST" double group P.I.D. automatic calculation type glass liquid crystal temperature cooller, which is imported from England. (heating and cooling P, I, D automatic calculation function, more accurate temperature cool, energy saving, can save more than 35%; flow failure display is easy Maintenance, no professional maintenance personnel, surge wave filter and absorption device, adapt to unstable voltage environment. Imported PC plate mining With DC loop cool, anti - interference, low voltage, long life; 工业煤改电硫化机专项使用导热油控温设备

 173-726O-59O6  模具升温快,温差小,节能20%以上。使用法兰型瑞典丝双功率不锈钢电热管,适合不同温控场合使用,

进口电热丝,使用寿命长,不易烧坏;http://www.dianjiareyoulu.com压力指示表;电磁阀采用宝岛原装进口鼎器牌UNID,耐高温180℃。回水温度表,能监测模具孔内有无阻塞,射出成形条件是否稳定。高压安全保护系统,防爆装置.高压安全阀.加压系统水泵采用意大利“福利德”小流量,大压力.冷却器:采用韩国“波雷京”板式热交换器,冷却速度快,温控准确。采用“富士”无熔丝开关,短路和过载迅速保护。电磁接触器采用法国“施耐德”或德国“金钟穆勒”,工作寿命长;采用原装进口英国“WEST”双组P.I.D.自动演算型玻璃液晶温控器,(加热和冷却均有P I D 自动演算功能,温控更准确节能)可省电35%以上;流程故障显示,容易检修;无须专业维修人员.突波过滤及吸收装置,适应电压不稳环境。进口PC板采用DC回路控制,抗外界干扰,低电压寿命长;上述图片及建议仅供参考,详细型号请咨询我们,更多型号请访问我们的网站 或致电我们了解"。173-726O-59O6  袁

 

相关推荐

相关推荐

免责申明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,铝道网对此不承担任何保证责任。为保障您的利益,我们建议您选择铝道网的 铝业通会员。友情提醒:请新老用户加强对信息真实性及其发布者身份与资质的甄别,避免引起不必要

风险提示:创业有风险,投资需谨慎。打击招商诈骗,创建诚信平台。维权举报:0571-89937588。

  • 苏州迈浦特机械有限公司
  • 经营模式:制造商+服务商
  • 主营:模温机,油温机,水温机,油循环温度控制机,水循环温度控制机,冷冻机,导热油加热器,冷热一体机
  • 地区:江苏 苏州

联系方式

袁小靓销售专员

在线联系

手 机:点击查看

电 话:点击查看

传 真:点击查看

地 址:

供应产品分类

新品上市